How to use the Honey Comb Pad

Go Back

Glaze coat of Blue Sapphire applied over base coat of Off White, then removed with HoneyComb Pad using Negative Application Method. Effect will vary based on color and technique—always do a test area!

Step1: Clean and Prime	Step2: Base Coat	Step3: Apply Glaze	Step4: Create the Effect
Clean Surface thoroughly. Remove all flaking or chalky paint. Seal surface with stain killer primer sealer. xxxxxx	Allow primer to dry thoroughly. Paint on Off White base coat. This is your first color. Use a semi-gloss or eggshell coating.	Allow base coat to dry thoroughly. Apply a Blue Sapphire glaze coat. This is your second color. Apply glaze sparingly.	While the glaze is still wet, drag Honey Comb Pad over surface, removing glaze to create effect (Click here for more information on Negative Application Method.) For best results use "buddy system": One person applies glaze while "buddy" creates effect behind. For additional colors and depth, repeat steps 3 and 4. Remember: Effects vary. Do a test area.
Whizz Fabric Rollers are recommended:	Whizz Velour Rollers are recommended:	Whizz Velour or Sponge Rollers are recommended:
#86620 Handle for 4" & 6" Rollers #54011 4" Roller Refill (2pk) #54247 Handle with 6" Roller #58016 6" Roller Refill (2pk)	#51600 Handle with 4" Roller #51646 Handle with 6" Roller #51012 4" Roller Refill (2pk) #51016 6" Roller Refill (2pk)	#57600 Handle with 4" Roller #57646 Handle with 6" Roller #54060 4" Roller Refill (2pk) #54064 6" Roller Refill (2pk)